Order by Phone & Online Order Inquiries: 1-877-445-3527
For this project you will need:
| Screwdriver | Wire Cutters |
| Included Fixture Hardware | Appropriate Safety Equipment |
Step 1
Make sure no power is running to the electrical box and that none of the wires in the box are live. Remove caps off wires in box and on light fixture.
Step 2
Separate the wires. Green wire is ground and goes to bare copper wire in box. (Bare copper or green is always the ground wire).
Step 3
Your neutral wire is always white. Connect the white fixture wire to the white wire in the box. Black is always hot/live (may also be a red wire). The black wire always goes to black wire.
Step 4
Attach your fixture to the wall with the included hardware. Turn power back on.