Collated SAE #8 x 1-3/4 in Yellow-zinc dichromate flat head subfloor screw is suitable for fastening subfloor, sheathing, sill plate and stair tread applications. The holding power of these flat head square drive screws reduce the gap between the joist and squeaks causing subfloor.
Collated SAE wood underlayment screw features gray phosphate finish for corrosion resistance. This trim head screw with nibs offer easy countersinking. The sharp point screw has #2 square drive and measures #7 x 1-1/4 in.
PDPA Series drive pin has 7.62 mm Dia head and 3.98 mm in Dia shank. The drive pin shows tight tolerance for superior performance. It works with PTP-27L, PTP-27S, PT-27, PT-27HDA, PT-22A, PT-22GS, PT-22P, PT-22HA Simpson Strong-Tie, 721, D-60, U-2000 and various other low-velocity tools.
PDPA Series drive pin has 7.62 mm Dia head and 3.98 mm in Dia shank. The drive pin shows tight tolerance for superior performance. It works with PTP-27L, PTP-27S, PT-27, PT-27HDA, PT-22A, PT-22GS, PT-22P, PT-22HA Simpson Strong-Tie, 721, D-60, U-2000 and various other low-velocity tools.
PDPA Series drive pin has 7.62 mm Dia head and 3.98 mm in Dia shank. The drive pin shows tight tolerance for superior performance. It works with PTP-27L, PTP-27S, PT-27, PT-27HDA, PT-22A, PT-22GS, PT-22P, PT-22HA Simpson Strong-Tie, 721, D-60, U-2000 and various other low-velocity tools.
PDPA Series drive pin has 7.62 mm Dia head and 3.98 mm in Dia shank. The drive pin shows tight tolerance for superior performance. It works with PTP-27L, PTP-27S, PT-27, PT-27HDA, PT-22A, PT-22GS, PT-22P, PT-22HA Simpson Strong-Tie, 721, D-60, U-2000 and various other low-velocity tools.
Level 4 Single shot 0.22 caliber "A" crimp loads are compatible with PT-22, PT-22GS, PT-22H tools as well as other common low-velocity and single shot powder-actuated tools.
Level 3 Single shot 0.22 caliber "A" crimp loads are compatible with PT-22, PT-22GS, PT-22H tools as well as other common low-velocity and single shot powder-actuated tools.
Level 2 Single shot 0.22 caliber "A" crimp loads are compatible with PT-22, PT-22GS, PT-22H tools as well as other common low-velocity and single shot powder-actuated tools.