#8 x 1-1/2" Zinc Maxi-Loc Washer Head Pocket Screw-100/Pack
UPC
647096413354
Online Sku
1006538
Model Number
SML-C150-100
$0.00
$10.49
Kreg SAE #8 x 1-1/2 in Pocket hole screw features case hardened steel construction with rust-resistant zinc-plated finish. With Maxi-Loc washer head, this deep square drive screw prevents driver from jumping out. To drill a cleaner pilot hole, the sharp edge of the self-tapping Type 17 piercing tip makes it an easy work. The course threaded screw is suitable for softwoods, plywood and 3/4 - 7/8 in thick particle board.
- Extra metal in head eliminates head snapping off
- Deep square drive prevents driver from jumping out
- Dri-lube finish reduces driving torque needed
- Sharp edge of self-tapping tip drills a cleaner pilot hole
- Needle sharp point minimizes walking
- Washer head design for maximum joint strength
- Has Type 17 piercing tip
- Case hardened
- Course thread for softwoods| plywood and particleboard 3/4 - 7/8 in thick
Material | Case Hardened Steel |
---|---|
Finish | Zinc Plated |
Thread Size | #8 |
Measurement Type | SAE |
Thread Type | UNC |
Length | 1-1/2 inch |
Head Shape | Washer |
Self-Tapping | Yes |
Driving Method | Square |
Overview
Kreg SAE #8 x 1-1/2 in Pocket hole screw features case hardened steel construction with rust-resistant zinc-plated finish. With Maxi-Loc washer head, this deep square drive screw prevents driver from jumping out. To drill a cleaner pilot hole, the sharp edge of the self-tapping Type 17 piercing tip makes it an easy work. The course threaded screw is suitable for softwoods, plywood and 3/4 - 7/8 in thick particle board.
- Extra metal in head eliminates head snapping off
- Deep square drive prevents driver from jumping out
- Dri-lube finish reduces driving torque needed
- Sharp edge of self-tapping tip drills a cleaner pilot hole
- Needle sharp point minimizes walking
- Washer head design for maximum joint strength
- Has Type 17 piercing tip
- Case hardened
- Course thread for softwoods| plywood and particleboard 3/4 - 7/8 in thick
Specifications
Material | Case Hardened Steel |
---|---|
Finish | Zinc Plated |
Thread Size | #8 |
Measurement Type | SAE |
Thread Type | UNC |
Length | 1-1/2 inch |
Head Shape | Washer |
Self-Tapping | Yes |
Driving Method | Square |