Order by Phone & Online Order Inquiries: 1-877-445-3527
#7 x 1-1/2" Zinc Maxi-Loc Washer Head Pocket Screw-100/Pack
UPC
647096414313
Online Sku
1006532
Model Number
SML-F150-100
$0.00
$11.99
Kreg SAE #7 x 1-1/2 in Pocket hole screw features case hardened steel construction with rust-resistant zinc-plated finish. With Maxi-Loc washer head, this deep square drive screw prevents driver from jumping out. To drill a cleaner pilot hole, the sharp edge of the self-tapping Type 17 piercing tip makes it an easy work. The fine threaded screw is suitable for hardwoods that are 1 to 1-1/8 in thick.
- Extra metal in head eliminates head snapping off
- Deep square drive prevents driver from jumping out
- Dri-lube finish reduces driving torque needed
- Sharp edge of self-tapping tip drills a cleaner pilot hole
- Needle sharp point minimizes walking
- Washer head design for maximum joint strength
- Has Type 17 piercing tip
- Case hardened
- Fine thread for hardwoods 1 to 1-1/8 in thick
| Material | Case Hardened Steel |
|---|---|
| Finish | Zinc Plated |
| Thread Size | #7 |
| Measurement Type | SAE |
| Thread Type | UNF |
| Length | 1-1/2 inch |
| Head Shape | Washer |
| Self-Tapping | Yes |
| Driving Method | Square |
Overview
Kreg SAE #7 x 1-1/2 in Pocket hole screw features case hardened steel construction with rust-resistant zinc-plated finish. With Maxi-Loc washer head, this deep square drive screw prevents driver from jumping out. To drill a cleaner pilot hole, the sharp edge of the self-tapping Type 17 piercing tip makes it an easy work. The fine threaded screw is suitable for hardwoods that are 1 to 1-1/8 in thick.
- Extra metal in head eliminates head snapping off
- Deep square drive prevents driver from jumping out
- Dri-lube finish reduces driving torque needed
- Sharp edge of self-tapping tip drills a cleaner pilot hole
- Needle sharp point minimizes walking
- Washer head design for maximum joint strength
- Has Type 17 piercing tip
- Case hardened
- Fine thread for hardwoods 1 to 1-1/8 in thick
Specifications
| Material | Case Hardened Steel |
|---|---|
| Finish | Zinc Plated |
| Thread Size | #7 |
| Measurement Type | SAE |
| Thread Type | UNF |
| Length | 1-1/2 inch |
| Head Shape | Washer |
| Self-Tapping | Yes |
| Driving Method | Square |
