6" Roof Hanger with Tab

The roof hanger with tabs is designed for on the roof deck installation. If you lack a fascia board, or have a steep roof pitch, a roof mounted hanger is recommended. With the galvanized steel being 1" wide and 1/5" thick, these hangers are super strong. You need to use a hanger bender to bend the shaft to the correct angle. You can also use a vice or press brake. You simply fold the front and back tabs down locking the gutter in place. This makes it perfectly suited for all construction, including remodeling and renovation. The hanger is tested to the highest standards and strength classification available. Fasten the hanger to the roof deck with 2-3 stainless or exterior screws, min 1 3/4" long, per hanger. Calculate with one hanger per two feet of gutter.