Maple Leaf Image Nous sommes votre équipe canadienne de l’Atlantique

Maple Leaf Image Nous sommes votre équipe canadienne de l’Atlantique

DIY Project : How to Create a Christmas Tray

10 août 2026

DIY Project : How to Create a Christmas Tray

Materials You Will Need

  • Pine boards for the tray tiers and decorative scallop pieces.
  • Turned wooden baluster for the center supports.
  • Decorative cabinet pull or knob for the top handle.
  • Pencil, string, and small nail for drawing circles.
  • Jigsaw with a fine-tooth blade.
  • Drill and drill bits.
  • Driver and appropriate screws.
  • Brad nailer and brad nails.
  • Wood glue.
  • Sandpaper or sanding tools.
  • Paint or stain in your preferred finish.

Step 1

  • Create a simple circle-drawing guide by tying a pencil to one end of a string and a small nail to the other.
  • Determine the radius by dividing the desired circle diameter in half. For example, an 18-inch circle requires a 9-inch string length.
  • This simple compass will be used to accurately mark the circular tray components.

Step 2

  • Lay two pine boards side by side. Hammer the small nail attached to your pencil to one side of the middle seam. Pulling the string taut, draw an 18 circle onto the pine. Determine the length of the string by dividing the final measurement in half (i.e. 18 circle = 9 string).
  • Repeat this process, making a 12 and two 8 circles on the additional pine boards.
  • Create a scallop jig from a piece of stiff paper (a cereal box works well). The scallop should measure 2 wide and high. Trace 30 scallops onto the blank areas of the pine board.

Step 3

  • Using appropriate safety equipment, cut out all circles and scallop pieces with a jigsaw.
  • Cut the smaller decorative pieces first to improve stability and cutting accuracy.
  • Sand all cut edges smooth to remove splinters and rough areas.
  • Dry-fit the scallops around the large tray section to confirm spacing and fit before assembly.

Step 4

  • Cut the baluster into sections for the supports between tray levels.
  • Glue and assemble the base tray components according to your layout.
  • Use wood glue and brad nails to securely fasten the tray sections together.
  • Confirm all pieces are centered and aligned before allowing the glue to set.

Step 5

  • Drill pilot holes through the tray sections and support pieces to prepare for assembly.
  • Use the center mark from the circle layout as a guide for accurate positioning.
  • Apply wood glue to the support component and secure it using screws driven from the underside of the tray.
  • Ensure all fasteners are properly countersunk for a clean appearance.

Step 6

  • Continue assembling the tray by attaching the middle and upper tiers to the support sections.
  • Drill pilot holes where required to reduce the risk of splitting the wood.
  • Use screws and glue to create strong connections between each level.
  • Check that each tray remains centered and level as the structure is assembled.

Step 7

  • Install the decorative cabinet pull or hardware at the top of the tray to serve as a handle and finishing detail.
  • Fill nail holes, imperfections, and visible seams with wood filler.
  • Sand smooth and apply your chosen paint or stain finish.
  • Allow the finish to dry completely before use.
  • Decorate the finished tray with ornaments, greenery, treats, candles, or other seasonal dcor to create a festive display.

Your completed tiered Christmas tray can serve as a beautiful centerpiece, dessert stand, or decorative display throughout the holiday season. Customize the finish and decorations to match your holiday dcor style and create a unique handmade accent for your home.

Produit ajouté à votre panier
Chargement en cours...