Flexicolor™ CQ 1.89 L Pre Mixed Grout

This acrylic pre-mixed grout is a blend of 50-75% silica sand and 2.5-5% titanium dioxide. It’s designed with BioBlock® technology to fight against mold and mildew. The grout is resistant to cracks, stains, and chemicals. It has a controlled shrinkage formulation and a relative density of 1.77 g/cm3. In its liquid form, the grout takes 6 days to cure and 24 hours to dry. It has a pH range of 8.3 and a flash point above 100 degrees Celsius. The grout is packaged in a 1.89 L container with a specialized pail design featuring a flip-top hinged lid. It’s suitable for grouting joints ranging from 1/16 inch to 1/2 inch. It’s perfect for grouting both interior and exterior floors, walls, countertops, and backsplashes. It can be used with glass tile/mosaics, porcelain, ceramic and natural stone tile, quarry, and cement-based terrazzo. The grout can also be used in wet conditions like bathtub surrounds, shower walls, and shower floors. It meets ANSI standards.

• This grout can be used on sensitive tile surfaces once tested| requires no sealer and cures naturally from evaporation of the low level of water in the formulation
• Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient and requires 65% less time to install
• Stain- and chemical-resistant grout formulation with no sealing required
• Easy cleanability| colour consistency and improved workability
• Dries to a hard| uniform colour surface in 24 hours and will not stain surfaces
• Crack-resistant and shrinkage-controlled formulation| with no efflorescence
• Bibcock® technology for mould and mildew resistance
• Use straight from the pail| without the need to add water
• Specialized pail design with flip-top hinged lid
• Standards: Meets or exceeds specific tests in ANSI A118.3 and A118.6 covering other grout types