Search results for: '5'

Designed for exhausting kitchen and bathroom fans through your home's soffit, this Imperial soffit exhaust vent easily installs under the soffit panel and adapts to 4-inch and 6-inch round exhaust ducts. A butterfly damper allows for maximum airflow, while helping to keep cold air out and conserve energy. Its grille and damper also help to prevent pests from entering the home. The exhaust vent features a low-profile flush mount design, and is made from UV-resistant plastic that not only resists fading and discoloration from the sun, but is paintable to match the color of your home's soffit.

With its easy-to-install design, this Imperial 4" louvered vent hood is ideal for clothes dryer and bath fan venting. The vent hood is made of UV-resistant plastic that resists fading and discoloration from the sun, and is paintable to match the exterior of your home. The louvers open easily for maximum airflow, and close when not in use to help prevent back drafts. This vent hood comes complete with an aluminum mounting pipe for ease of installation, and has a low-profile design for a clean finish.

With its easy-to-install design, this Imperial 6-inch louvered vent cap is ideal for bath fan and kitchen range hood venting. The vent cap is made of UV-resistant plastic that resists fading and discoloration from the sun, and is paintable to match the exterior of your home. The louvers open easily for maximum airflow, and close when not in use to help prevent back drafts. This replacement vent cap also has a discreet, low-profile design for a clean finish.

This easy-to-use Imperial 4-inch x 25-foot flexible aluminum foil air connector is ideal for bath fan and other general purpose venting applications. It's made from tear- and puncture-resistant 2-ply aluminum foil reinforced with a corrosion-resistant wire helix. This product has been rated as a class 1 air connector under UL 181/ULC-S110 for installation lengths of 14-feet or less. It is not suitable for dryer venting.

The easy-to-install Imperial 4-inch premium roof vent cap helps remove humidity from the exhaust area, inhibiting moisture that can cause damage to your home. It features an anti-gust damper system that stops the back-flow of exhaust air, and a plastic screen that helps to prevent pests from entering your attic. The vent cap is tall for superior performance on snow-covered roofs and its distinctive design helps keep rain and snow from entering the attic. It also has an optimum venting angle for minimal pressure drop. Built to last, the heavy-duty roof vent cap is made with a paintable powder-coated steel construction and features a seamless one-piece base. It is ideal for use with bath ventilation fans and can be used in clothes dryer applications only when the plastic screen is removed. This vent cap is intended for shingled roof installation and is designed for 2/12 to 12/12 roof slopes.

Designed for simple installation without the need for tools, these Imperial 4-in metal tension clamps feature an easy-to-use pressure mechanism that opens and closes by hand. Ideal for use with 4-inch dryer venting applications and 4-in bathroom fans, these tension clamps are compatible with non-rigid flexible foil ducts. Use them to easily fasten duct, or to connect duct to a clothes dryer exhaust port or bath fan. The clamps are constructed from heavy-duty steel for lasting durability and come in a convenient pack of two.

Durable and easy to install, this Imperial 4" preferred vent cap is ideal for effective clothes dryer and bath fan venting. The vent cap features a wide-mouthed anti-gust design for optimal airflow and a built-in damper that helps prevent back drafts. A pest guard helps keep birds and rodents from entering the home, and has a hinged design for easy cleaning. Made for lasting use, this replacement vent cap is constructed from UV-resistant plastic that resists fading and discoloration from the sun and is paintable to match the exterior of your home. The vent cap comes complete with a 3" crimped mounting pipe for ease of installation.

This Imperial semi-rigid dryer hook-up kit is ideal for clothes dryer venting applications where a UL-certified all-aluminum product is required by code. The easy-to-install replacement hook-up kit includes two worm gear clamps and features a 4-inch x 8-foot UL-certified semi-rigid aluminum clothes dryer transition duct that is heat and flame resistant for safe and efficient operation. Designed to last, the semi-rigid duct is crush resistant and retains its shape for less lint accumulation and improved airflow. Flexible enough for installation in tight spaces, the duct allows for a simple connection without the use of elbows. This hook-up kit is recommended by dryer manufacturers for use with both electric and gas clothes dryers.

This Imperial 3-inch to 4-inch increaser allows you to easily adapt a 3" bathroom fan exhaust port to a 4" flexible duct. A quality product, the increaser is made from sturdy polystyrene for lasting performance, and is quick and easy to install.

Keep unwanted cold and hot air from entering your home with an Imperial 4-inch draft blocker. Easy to install, this draft blocker is designed for clothes dryer and bath fan exhaust venting applications. The single flap opens to allow exhaust air to exit when the clothes dryer or bathroom fan is in use. When not in use, the draft blocker's flap stays shut, ensuring outside air cannot make its way back into your home.

Ideal for general-purpose venting and made for optimal airflow, this Imperial 6-inch intake hood effectively allows fresh air into your home with its fixed louver design. To help prevent birds and rodents from entering, a built-in plastic pest guard is included. The intake hood is constructed from UV-resistant plastic that resists fading and discoloration from the sun, and is paintable to match the exterior of your home. The hood comes complete with an aluminum mounting pipe for ease of installation.

With its easy-to-install design, this Imperial 4-inch louvered vent hood is ideal for clothes dryer and bath fan venting. The vent hood is made of UV-resistant plastic that resists fading and discoloration from the sun, and is paintable to match the exterior of your home. The louvers open easily for maximum airflow, and close when not in use to help prevent back drafts. A pest guard helps keep birds and rodents from entering the home, and is removable for easy cleaning. This vent hood comes complete with an aluminum mounting pipe for ease of installation.