Search results for: '5'

This set of two filters fits perfectly into your Venmar AVS / vanEE air exchangers, including models 90H-V ECM ERV, 90H-V+, 60H-V+, E10 HRV, E15 ECM HRV, EKO HRV 1.5, and Venmar ERV EKO 1.5 (For Use with Model 43910). With a nominal size of 14.25” x 9.25", these filters ensure optimal performance of your air exchanger, enhancing the air quality in your environment. Trust in the quality and reliability of Venmar, and make the smart choice for your air filtration needs with the Core Filter For Venmar PRO250.

This foam filter installs on the heat recovery core and fits the following models: Venmar AVS / VanEE Air Exchangers Models: THH 1.0, THSF 104, HRV 2600, HR 2.6, HEPA 3100, HF 3.1. Comes in a set of 2.

HRV Aluminum mesh replacement filter for air exchanger. Fits Venmar EA1500, EA109, EA20100, 20200, Pro200, and Broan HV1.5.

These pre-filters can be installed on the HEPA filter frame. These pre-filters are not washable. Use a pre-filter as the first step in the filtration process to capture large particles before they reach the main filter. Helps to protect and extend the life of your main filter.

This foam filter can be installed in place of a HEPA filter. 25% efficient when compared to HEPA

The Imperial 48mm Metalized poly tape has no liner to peel and is excellent general purpose ventilation sealing tape. The tape is made of a UV resistant treated polypropylene film and coated with high shear, high tack adhesive – made for strength and longevity. When properly applied, the tape has 30 lbs/in tensile strength and 40 oz/in adhesion to steel. For use in the sealing of flexible air ducts and air connectors, sealing of metal duct and connectors, and sealing of foam insulation used for water pipes.

Air duct in silver colour, features fiberglass reinforced metalized outer jacket and 2-ply black polyester inner core that offers better resistance/durability. Air duct has operating temperature range of -20 to 140° Fahrenheit at 6 in H2O and -20 to 180° Fahrenheit at 2 in H2O. It has maximum flame spread of 25 and maximum smoke development of 50. Air duct is UL listed.

The Imperial 5" louvered vent hood has a low profile flush mount design. The louvers open easily for maximum airflow and is designed for quiet operation.

Used primarily for heating & air conditioning applications for transition from one round pipe to two round pipes. Similar to a tee but with a Y-shaped design. Allows for a branch to be made in a duct run at an angle and is designed to maintain the same cross-sectional area throughout the fitting, ensuring that the flow of air or fluid is not restricted.

The Imperial 6" galvanized connector union with crimps on both ends is used to connect two lengths of insulated duct together. Creates a secure and semi-permanent connection between the two lengths of duct; unlike couplings, unions allow easy assembly and disassembly without causing any piping deformation.

This versatile galvanized sheet is made with 30 gauge durable steel. Sheet size is 36 inches by 96 inches. It can act as a protective cover between wall or ceiling studs or floor trusses. For custom duct fabrication, you can cut and shape the sheet to create custom ductwork components such as connections, transitions, or plenums. It can also be used to repair or replace damaged sections of existing galvanized ducts and can reinforce duct systems' structural integrity.

The Imperial 4" galvanized connector union with crimps on both ends is used to connect two lengths of insulated duct together. Creates a secure and semi-permanent connection between the two lengths of duct; unlike couplings, unions allow easy assembly and disassembly without causing any piping deformation.