Begin by picking out the tile you want for your backsplash. Most tiles follow the same installation steps. If you re new to tiling, try a smaller subway tile or a similar tile.
Calculate the number of tiles you need based on your square footage.
Tip: Buy at least 10% extra tile for cutting errors and future repairs.
Step 2: Prep Your Space
Protect your kitchen counter with a plastic dropcloth to keep it safe from adhesive or grout. Turn off the power in the room and unplug any nearby appliances. Remember to remove the outlet covers.
Remove any old wallpaper or tile, and repair the drywall if you find rough or uneven spots. The wall should be smooth so your tiles look even.
Decide where to start tiling. It often looks best to begin at the main focal point of your wall. Lay out your tiles first to see where you ll need to make cuts for outlets and edges.
Step 3: Tile Installation
Mix your tile adhesive. Use mortar for glass and stone tiles. For ceramic tiles, use mastic, a premixed adhesive designed for them.
Spread tile adhesive evenly on the wall with a trowel. Optionally, use "back buttering" by applying adhesive to the back of each tile before placing it. This strengthens the bond but is not required.
Start placing your tiles on the wall, beginning at the bottom where it meets the counter. Use spacers between each tile to keep the gaps even. Continue adding tiles with spacers until the area is covered. Use a grout float to check that everything is level. Let the tiles dry for at least 24 hours.
Step 4: Grout Application
Once the mortar is dry, remove all the spacers between the tiles. Wipe the tiles with a damp sponge before you start grouting.
If you re mixing grout yourself, aim for a pudding-like consistency. If you have pre-mixed grout, simply open the bucket and begin.
Use a grout float to spread grout evenly between the tiles, working in small sections. Wipe away any excess grout with a damp sponge as you go.
Step 5: Finishing Up
After the grout has set, wipe the tiles with a damp sponge to remove any haze. Add a thin line of latex caulk where the tile meets the counter for a clean finish.
When your backsplash is finished, add any outlet extenders if you need them. Put the outlet covers back on and turn the power back on.
That s it! You now have a beautiful tiled backsplash. Take a moment to enjoy your kitchen s new look.