Project Overview
Note: The time commitment, cost, and materials listed below are based on building two 48-inch floating shelves. This project guide is intended as a reference and may vary depending on individual skill level and project requirements.
Tools
- Drill
- Saw
- Pin Nailer
- Stud Finder
- Measuring Tape
- Level
- Pencil
How to Build Floating Shelves
1. Find Your Studs
Using a measuring tape, measure the width of the wall space where the shelves will be installed. For this project, the shelf width was 48 inches.
Use a stud finder to locate and mark your wall studs. Then use a level to draw a straight line across the installation area. Repeat this process for each shelf location.
2. Create Cleats to Brace Your Shelves
Cut your 2" x 2" studs to the width measured in the previous step. Then cut 3 to 4 shorter pieces to your desired shelf depth. These shorter pieces will act as braces to support the shelf.
For this build, the braces were cut to 8 inches long, with three braces used per shelf. Wider shelves may require additional braces for added support.
Attach the shorter pieces to the longer support board using construction adhesive and wood screws. Position one brace at each end and one in the centre.
What you have created is called a cleat. This structure attaches directly to the wall studs and serves as the primary support for your floating shelves.
Place the cleat on the reference line you marked earlier and use a level to ensure it is straight. Secure it into the wall studs with wood screws. Repeat this step for each shelf.
3. Attach the Shell of Your Shelf
Once the cleats are installed, cut your 1" x 10" pine boards to the shelf width. For this project, the boards were cut to 48 inches long.
Cut two boards for each shelf, one for the top and one for the bottom. Attach both pieces to the cleat using construction adhesive and pin nails.
Next, measure the finished shelf height and cut a facing piece from the 1" x 4" board. Attach the front piece using adhesive and pin nails to complete the shelf box.
Fill visible nail holes with wood filler for a seamless finish, or leave them visible for a rustic appearance.
4. Finishing Touches
Apply your preferred wood stain to highlight the natural beauty of the wood and complete the project.
Once finished, style your new floating shelves with decorative accents, plants, books, storage containers, or everyday essentials.
Floating shelves add both practical storage and visual interest to bathrooms, kitchens, laundry rooms, home offices, and living spaces.
