Maple Leaf Image We’re Your Atlantic Canadian Team!

Maple Leaf Image We’re Your Atlantic Canadian Team!

Bench Staining Project with Sage Phillips

August 10, 2026

Bench Staining Project with Sage Phillips

Building a rustic wooden bench is a rewarding DIY project that combines simple woodworking techniques with a timeless design. By adding distressed details and a weathered finish, you can create a custom piece that looks like it has been crafted from reclaimed wood.

This project is suitable for a variety of spaces, including entryways, mudrooms, bedrooms, living areas, and covered outdoor locations.

Materials & Tools

  • 2 x 8 x 8' Knotty Pine Board
  • Saw or Mitre Saw
  • Hammer
  • Chisel
  • Sander and Sandpaper
  • Wire Brush
  • Wood Glue
  • Screws
  • Wood Stain
  • Matte Polyurethane
  • Clean Rags
  • Reciprocating Saw (Optional)

Step 1: Cut the Wood

Begin by cutting the knotty pine board into two equal 4-foot sections. One section will become the bench top.

Using the second section, cut the following pieces:

  • 4 Pieces at 17" x 2.5" for the Legs
  • 2 Pieces at 4" x 2.5" for the Lower Supports
  • 2 Pieces at 2.5" x 2.5" for the Upper Supports

Cut a 5-degree angle on each leg and support piece to create the bench's finished profile.

Step 2: Distress and Age the Wood

To create a rustic, reclaimed appearance, distress the wood using a hammer and chisel. Add dents, scratches, and imperfections in areas where natural wear would typically occur.

For deeper texture, use a reciprocating saw to create worn edges and realistic saw marks.

Sand all pieces progressively using 60-grit, 80-grit, and 120-grit sandpaper to smooth rough edges while preserving character.

Finish by brushing the wood with a wire brush to enhance grain patterns and create an aged appearance.

Step 3: Build the Bench Frame

Construct two matching A-frame assemblies using two legs, one upper support, and one lower support for each side.

Secure each frame using wood glue and screws. Ensure the assemblies are square and level before tightening all fasteners.

Attach both completed leg assemblies to the underside of the bench top using additional glue and screws.

Step 4: Stain and Finish the Bench

To create a weathered finish, begin with a light stain coat that helps neutralize the natural yellow tones of the pine.

Apply a darker stain using a clean rag, working the stain into distressed areas, grooves, and saw marks to emphasize the aged texture.

Lightly sand the bench after the first stain coat dries to expose highlights and create additional variation in tone.

Apply a second coat of stain for depth and richness. Allow the stain to cure fully before applying a coat of matte polyurethane to help protect the finished surface.

Project Complete: Congratulations! You now have a custom rustic bench featuring distressed wood details and a durable protective finish. This versatile piece works beautifully in entryways, mudrooms, bedrooms, living spaces, or covered outdoor areas.

Need help with materials, tools, or project planning? Visit your local Project Centre for expert advice and product recommendations tailored to your style and budget.

Product added to your cart
Loading...